Printing directly from the camera (Camera-direct prints)
Solution
Connect the camera to the printer and print directly from the camera.
CAUTION
- In this section, [PowerShot A3100 IS] is used as an example to explain the operations. Depending on your model, the position of buttons, screen indications, and setting items may vary.
- These instructions show how to print one image on one sheet of paper as an example.
1. Connect the camera to the printer.
Connect the [interface cable] to the camera's [DIGITAL terminal].
Connect the other end of the cable to printer's USB terminal.2. Turn the printer's power on.
3. Press the <Playback> (
) button to turn on the camera.
) button to turn on the camera.
4. Operate the <directional buttons> left or right to display an image to print on the LCD monitor.
Make sure that the [SET] icon is displayed in the upper left corner of the LCD monitor, and then press the camera's <FUNC./SET> (
) button.
) button.5. The screen for specifying the print settings appears.
Operate the <directional buttons> left or right to select [Date] for adding the date.
[Date] for adding the date.Operate the <directional buttons> left or right to specify the number of prints.
the number of prints.Select 
[Paper Settings], and then press the camera's <FUNC./SET> () button.
[Paper Settings], and then press the camera's <FUNC./SET> () button.6. The screen for setting the paper size appears.
Operate the <directional buttons> up or down to select the paper size, then press the camera's <FUNC./SET> () button. In the image shown above, the [9 x 13 cm] size is selected.
) button. In the image shown above, the [9 x 13 cm] size is selected.7. The screen for setting the paper type appears.
Operate the <directional buttons> up or down to select the paper type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Photo] is selected.
) button. In the image shown above, [Photo] is selected.8. The layout (border) settings screen appears.
Operate the <directional buttons> up or down to select the layout type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Bordered] is selected.
) button. In the image shown above, [Bordered] is selected.9. Return to the print setting screen.
Make sure that the settings are correct.Select [Print] and press the camera's <FUNC./SET> () button to start printing.
[Print] and press the camera's <FUNC./SET> () button to start printing.